Hunan TRX International Co., Ltd.
Hunan TRX International Co., Ltd.
Add to Cart
Cemented Tungsten Carbide Flat top Bit Buttons for Oil and Gas Field Engineering Materials
Product Description
This type of products are mainly used for thress-cone bit for oil and gas fields drilling and large-scale
open-pit mine with excellent product stability, ensuring the safety and reliability of deep mining.
Material Introduction
| Code of Material | Density (g/cm3±0.1) | Coercive Force (KA/M) | Hardness (HRA) ± 0.5 | Flexural Strength (Mpa) | Application
|
| KY16C | 13.95 | 4.0-6.0 | 85.0 | 2700 | - Used for alloy bit with high bit and complex structure. - Alloy bit with higher drill bit pressure - Suitable for hard or complex geological conditions. |
| KY15C | 14.0 | 4.5-6.5 | 85.5 | 2800 | - Used for alloy bit with medium-high bit and complex structure. - Alloy bit with medium drill bit pressure - Suitable for medium-hard or hard geological conditions. |
| KY13C | 14.20 | 5.0-7.0 | 86.0 | 2900 | - Used for alloy bit with medium-high bit and medium-high drill pressure. - Suitable for medium-hard or hard geological conditions. |
| KY11C | 14.42 | 5.5-8.0 | 87.5 | 3000 | - Used for alloy bit with short bit and simple structure. - Suitable for medium-hard or slightly soft geological conditions. |
| KY60 | 13.95 | 5.6-8.4 | 86.5 | 2900 | - Used for alloy bit with high bit and complex structure. - Alloy bit with higher drill bit pressure - Suitable for hard or complex geological conditions. - The product’s abrasive resistance is higher than KY16C. |
| KY45 | 14.20 | 6.4-8.8 | 87.5 | 3000 | - Used for alloy bit with medium-high bit and medium-high drill pressure. - Suitable for medium-hard or hard geological conditions. - The product’s abrasive resistance is higher than KY13C. |
| KY40 | 14.42 | 7.0-9.0 | 88.0 | 3200 | - Used for alloy bit with short bit and simple structure. - Suitable for medium-hard or slightly soft geological conditions. - The product’s abrasive resistance is higher than KY11C. |
| KY38 | 14.50 | 6.8-9.6 | 88.5 | 3250 | - Used for alloy bit with short bit and simple bit and slightly low drilling pressure. - Suitable for hard rock or non-ferrous metal ores mining. |
| KK30 | 14.72 | 7.6-9.6 | 89.0 | 2800 | - Used for gage bit, back bit and teeth-shaped bit. |
Product Specification
| Item No. | Basic Size (mm) | |
| Diameter (D) | Height (H) | |
| 1 | 7.2 | 7 |
| 2 | 8.2 | 7 |
| 3 | 9.2 | 8 |
| 4 | 10.2 | 8 |
| 5 | 14.8 | 15 |
| 6 | 16.2 | 15 |
| 7 | 17.8 | 18 |
| 8 | 20.2 | 17 |