Hunan TRX International Co., Ltd.
Hunan TRX International Co., Ltd.
Add to Cart
High Erosion Resistant Wood Cutting Tungsten Carbide Saw Tips
Description
1. Material: Tungsten Carbide Saw TIps
2. 100% pure raw material
3. Various sizes and types are available
4. High speed cutting
5. Good and stable quality
6. wood cutting, stone cutting etc.
7. Wear resistance
8. Improve internal micro-structure of alloy blade to avoid cracking
Physical properties of main grades
| Grade | Density | Hardness | TRS |
| (g/cm3) | (HRA) | (Mpa) | |
| YG6 | 14.9 | 91 | 1800 |
| YG6X | 14.8 | 92 | 1800 |
| YKM6A | 14.7 | 92.5 | 1800 |
| YG8 | 14.8 | 90 | 1950 |
| YT5 | 13 | 90.8 | 1900 |
| YT14 | 11.5 | 91.5 | 1500 |
| YT15 | 11.3 | 91.8 | 1450 |
| YW1 | 13.1 | 91.5 | 1600 |
| YW2 | 13.1 | 91 | 1600 |
| YS25 | 12.8 | 91.5 | 1900 |
| YC30S | 12.8 | 91 | 2000 |
| ZP35 | 12.8 | 91 | 2000 |
| YC40 | 13.2 | 90 | 1850 |
Grade Application Description
| Grade | Application recommended |
| YG6/ K20 | For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high |
| YG8/K30 | For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YK08/K40 | For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high |
| JX5/K20 | For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high |
| YG6X/K10 | For the cutting of the wood specially, recommend to use the high frequency welding |
| YG8X/K10 | For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding |
| K10S | For the cutting of the hard wood specially, Recommend to use the high frequency welding |
| K20S | For the cutting of the aluminum specially, Recommend to use the high frequency welding |
| K10UF | For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plastic, Use the high frequency welding |
| K20UF | For the cutting of the aluminum specially, Use the high frequency welding |
| K30UF | For the cutting of the stones specially, Use the high frequency welding |
| R06 | For the cutting of the plywood,density board and the sandwich board, Use the high frequency welding |
| R03 | For the cutting of the timber such as shaving board,laminated board,density board and compound material etc, Use the high frequency welding |
| YC40 | For the cutting of the large cast materials, Recommend to use the high frequency welding |
| YC501 | For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding |
Other Shapes of Saw Bit